Lugtronic / VEMS Plug-n-Play Stand-Alone ECU - Starting at $1,325................................................................... ***** FOR CONTACT - PLEASE EMAIL: Lugtronic@gmail.com ***
 
Starting at $1,325
Overview:
Finally! Now there is a full Plug and Play ECU solution for VW/Audi owners!
With LugTronic, you can be up and running with a stand alone ECU in less than 30 minutes!
The LugTronic PnP ECU Plugs into your stock harness, and mounts into the stock location.
A basemap is pre-installed in the ECU to get you up and running quickly and easily.
Avoid the horror stories you may have heard, and forget about begging forums for support.
LugTronic is a system developed by an experienced and dedicated tuner in the VW / Audi community.
VW / Audi Applications:
- MK4 Golf / Jetta / Audi 1.8T and VR6 1999+ (Harness Adapter)
$1595
- VW/Audi AEB 1.8T 1997+ (Harness Adapter - Limited Stock)
$1495
- MK3 Golf / Jetta 2.0 and VR6 OBD2 1996-1999 (Harness Adapter)
$1325
- MK3 Golf / Jetta 2.0 and VR6 OBD1 1993-1995 (Harness Adapter)
$1325
- Corrado VR6 / Passat VR6 1992+ (Harness Adapter)
$1325
- Audi 5 cylinder AAN / 3B (PnP ECU)
$1450
- New brands and models always considered - contact us!
Basic Specs:
- 8 High Impedance Injector Drivers
- 8 High and Low Power Ignition Drivers
- Onboard Wideband O2 Controller
- Onboard MAP Sensor - 400 KPA (44 PSI Boost)
- Onboard EGT Input for K-Type Thermocouple
- 16x14 maps for Fuel VE, Ignition Timing, and Lambda Target
- Idle Air Control
- Boost Control vs. Speed, Gear, RPM and TPS
- Launch Control and Anti-lag
- Full Throttle Shift Cut
- 6-8 Analog Inputs (Voltage, Fuel, Oil, Exhaust Pressure)
- 2 Wheel Speed Inputs
- Extra Outputs available for: Tachometer, Fan, Fuel Pump, Shift Light, Water Injection, Nitrous, Warning Light, etc.
Inputs:
- Crankshaft Speed/Position
- Camshaft Speed/Position
- Throttle Position
- Air Temperature
- Coolant Temperature
- 1-2 EGT Exhaust Temperature
- Wideband O2 Sensor
- 6-8 Analog Inputs (Voltage, Fuel,Oil, Exhaust Pressure)
- 2 Wheel Speed Inputs
Outputs - Hardware:
- 8x Injector Outputs
- 8x Ignition Outputs
- 6x 350mA Misc. Outputs
- 4x Stepper Motor Outputs
Outputs - Software:
- 2x RPM/TPS/MAP Outputs
- 1x RPM Output
- 1x WOT/RPM Output
- 1x Tachometer Output
- 1x Idle Valve Output (2 or 3 wire ISV)
- 2x Boost Valve Output
- 1x Anti-lag Throttle Kicker Output
- 1x Fuel Pump Relay Output
- 1x Fan Relay Output
- 1x Water Pump Relay Output
- 1x Warning Light Output
- 1x Auto Trans Brake "Creep" Output
Construction:
- High quality extruded aluminum, powder coated case
- OEM automotive grade harness connector
- Aluminum endplates with water resistant gaskets
- Surface mount internal components
- By Lugnuts at 02/17/2009 - 19:06
|
